Dignity Yoast test 🍉 ggggg

Mogami Gold Stage Mic Cable with Neutrik XLR Connectors is an ultra-rugged, “roadie proof” cable offering killer sound for active stage performers. Separating Mogami Gold Stage from other cable brands is unique cable cores with three times the number of copper strands compared to a typical high quality cable. The higher the stranding the less likely the cable is to break when handled. Two of these 105 strand cores are covered with a comprehensive full-coverage braided shield. This forms the basis of a nearly indestructible, yet highly flexible cable that offers transparency and accuracy unequalled by other brands.

Grilling Safety: Propane BBQ Edition

Home » DIY

Grilled food can really hit the spot on nice Arizona days. Before you use your BBQ, make sure that you keep these grilling safety tips in mind. This helps ensure that you and your family can enjoy grilled dinners without any trouble.

Store Propane Tanks Properly

Grilling safety involves storing propane tanks properly. Tanks for gas grills can easily become a hazard. Store these tanks in a vertical and upright position. Also make sure they are kept far away from any heat or ignition sources, such as lighters or matches. If you have a gas line for your grill, you don’t have to deal with propane tanks at all.

Turn the Grill on Safely

Another important grilling safety tip is to make sure that you turn the grill on correctly. This involves opening the lid and turning the propane on. After this is done, turn the knobs for the burners, then push the ignition. Doing this the right way lowers the risk of fires and other accidents.

Never Use Lighter Fluid

Never use lighter fluid to ignite a gas grill. Lighter fluid is a major fire hazard when it isn’t used properly. You will avoid having to worry about this if you have a gas grill with its own natural gas line installed.

Check for Leaks

Gas leaks can occur when you use propane tanks for your grill. You should check for leaks by putting a solution of water and light soap on the gas tank hose. If you see bubbles, this means you have a gas leak that needs to be fixed by a professional right away. Grills with a gas line have a lower risk of ending up with these leaks.

Don’t Reignite Right Away

If your grill doesn’t ignite, don’t light it again right away. You could have gas in the air that needs time to clear out. Lighting it again immediately could result in a fire and serious injuries. Wait for 5 minutes before you try to ignite your gas grill again.

Keep Your Grill Clean

Grilling safety includes making sure that your gas grill stays in good condition. Grease and other debris can build up over time, which can increase the risk of a fire. Clean debris off your grill and from the tray under it. You should wait for your grill to cool before cleaning it. Getting into the habit of doing this after using your grill each time means you won’t have to scrape a lot of debris off later on.

Turn Your Grill Off Properly

When it comes to grilling safety, it’s important to ensure that you turn your grill off the right way. This reduces the risk of injuries and accidents. You’ll need to turn the gas tank off before shutting off the gas burners. Make sure that your propane cylinder valve is fully closed to prevent gas from leaking. With a gas line grill, all you have to do is shut it off without having to deal with any tanks.

If you’re ready to install a gas line for your grilling area, contact Forrest Anderson. We can ensure that this is done properly for your safety.

Cleaning A Dishwasher Is Easy

Face it, when it comes to cleaning our dishes, our dishwashing machines are a lifesaver.  That is because we ask a lot from our dishwashers.  Considering the amount of work we have them do. It is no surprise that occasionally all that working results in unpleasant smells and odors.  Once that smell can be noticed in the living room however, you know that your next step is cleaning a dishwasher.

Luckily, a few quick steps and your favorite home remedy will eliminate the bad smells. Before you know it, your favorite cleaning appliance will be back up and running in no time.

Problem Signs of a Dirty Dishwasher

A number of issues will alert you to the need for cleaning a dishwasher.  You will probably first notice performance problems.  Dishes that once emerged spotless after the cleaning cycle will remain spotted and dirty regardless of how many times you run them through the rinse cycle.

Another problem sign might be leftover dirty water at the bottom of your machine following the drainage cycle.  This suggests that there might be a clog that must be cleared out.  Finally, once funky smells begin to waft throughout the house, you will know that cleaning a dishwasher is in your near future.

Cleaning a Dishwasher

Luckily, cleaning a dishwasher is not rocket science.  That said however, it can get yucky and icky.  The simple scientific reason for this yuck-factor is that food particles, once wet, get only grosser after sitting around in water.

The first step in cleaning a dishwasher begins by scrubbing the outside of the machine with a sponge and hot soapy water.

Inside, you want to focus on clearing out the drain unit.  Most new dishwashers use a manual clean filter that might get clogged if you don’t regularly rinse off and clean your plates before putting them in the dishwasher.

Once every couple of weeks you will want to pull out the bottom rack to get to the filter system.  Look for a central cylinder filter that can be unscrewed and lifted from the unit.  Once that is done, place the filter in hot and soapy water to soak.

Clean each part and remove any pieces of food that you might find inside the machine. Also, pull out the spray arm and search for clogged holes that can be rinsed out in the kitchen sink.  Once this is cleaned out, your next task is to tackle that nasty smell that grabbed your attention in the first place.

Getting rid of bad odors is easy at this point.  Simply place a clean bowl filled with white vinegar on the bottom rack before running a normal wash cycle.  Once the machine is running, the white vinegar will spread around the machine and get rid of the horrible small.

Seeking Out Professional Help

Cleaning a dishwasher is easy.  Should you be against handling pieces of soggy food however, you can always look for help in cleaning your dishwasher.  Here in the greater Phoenix, Arizona area, reach out to the expert team of technicians at Forrest Anderson for the help you need in reclaiming the fresh smell in your house.  Don’t let cleaning a dishwasher get in the way of your clean kitchen.

What You Need to Know About an Ice Maker Water Line

If you want cold water and ice from your fridge and you don’t have an ice maker water line behind it, you’ll need one installed. This is especially true if you have an RO System (reverse osmosis). Before you go ahead and order your fridge, consider some basic information about having an ice maker water line installed in your home.

Considerations when running an ice maker water line

  • Beware of kinks and bends in the line itself. An improperly installed line with kinks in it can cause your water flow to be diminished. A bent or kinked line can occur with a plastic as well as with a copper line.
  • Avoid sharp edges anywhere near your water line. This is especially true when using a plastic water line. If a sharp object ever does puncture your line, you’ll have to run the line again.
  • Run a properly-sized water line. Sometimes it pays to leave a little slack on the ice maker water line. This will allow you to fully slide the refrigerator away from the wall without having to disconnect your line.
  • If your water pressure is low you may need to install a pump. Expect to pay between $150 and $250 for the pump itself, plus labor if this part is necessary.

How will your kitchen be affected?

In most cases, holes will be drilled. The question is whether they’re drilled in cabinets, walls, floors, a combination of these — or all of the above. In any case, don’t be alarmed when your plumbing contractor begins drilling a half inch hole inside your kitchen cabinets. Aside from some carefully placed holes to feed the new ice maker water line, your kitchen shouldn’t be drastically altered in any other way you’d easily notice.

Old fridge? Give it a good cleaning

If you’re moving an existing fridge to a new location or into a new home, give it a good cleaning before hooking up your new ice maker water line. A simple flushing with vinegar will do the trick. Ask your home contractor if they’re willing to do this for you while they’re working on your line. It’s also a good idea to do a cleaning if you’re buying and installing a used refrigerator.

One and done

Your refrigerator fits snugly into its predesignated space. The last thing you want is to be constantly wiggling your fridge out of its spot for an ice maker water line repair. To avoid this, make sure the job is done properly the first time. Thankfully, as home improvement projects go, an ice maker water line installation is actually rather straight-forward.

Can I do it myself?

While there are DIY ice maker water line installation kits available at your local home improvement store, you may want to consider your level of experience. The project will involve drilling, running pipes, and occasionally having to respond to leaks in real time.

DIY ice maker water line kits are affordable and many do claim to be “all you need” to do the job. However, what doesn’t come in the box is plumbing experience. A qualified plumber will avoid common mistakes and adhere to best practices. If plumbing isn’t your fortĂ©, definitely bring a professional in for this project.

If you’re ready to run an ice maker water line and want the expertise of the professionals, call Forrest Anderson’s team of qualified water line installation specialists. We’ll ensure your water line is properly installed so you can enjoy cold water and ice for years to come!

Get Rid of Limescale in Phoenix, AZ

In bathrooms and kitchens, we often face the annoying problem of limescale building up. It is such an unpleasant sight. And it makes our beautiful faucets appear as if they were built in the 1800s. So how can you get rid of limescale and restore your faucets to gleaming status?

What is Limescale?

Limescale is a build up of minerals such as calcium and magnesium which are present in tap water. These minerals originate from your home’s plumbing system. And when these minerals deposit around your faucets, they form hard crusty deposits called limescale. Unfortunately, these deposits can prove cumbersome to remove, especially when they build up over a long period of time.

Areas, such as Phoenix, AZ, with hard water (water that contains a lot of dissolved minerals) are more prone to limescale build up.

Soft water equipment can help you get rid of limescale permanently. However, what do you do if it’s already there?

How to get rid of limescale

Follow these steps to restore shine to your faucets.

Clean the area

The first step is to prepare the working area. Wipe off dust, stains, and other types of dirt from the faucet and surrounding areas using detergent or any other household cleaner. This will give you a clear view of the amount of limescale build up and the work ahead of you.

Soak the limescale

The next step is to soak the limescale in a cleaning solution. Do not immediately begin scrubbing at the faucet in an attempt to get rid of limescale. This may damage the finishing of the faucet and other surrounding surfaces.

Instead, follow a more strategic approach. Spray the area with a solution of lemon juice or vinegar. You can use lemon juice from the store, or you can cut some fresh lemons in half and squeeze out the juice into a small bowl.

Wrap the faucet

If trying to gain access to difficult to reach areas, spray a piece of cotton or paper towel and wrap it tightly around the faucet. Allow the limescale to soak in the solution for a minimum of 30 minutes. Afterward, lightly scrub the faucet and surrounding areas. This should get rid of limescale very effectively.

Dip the spout in cleaning solution

Take a cup of vinegar or lemon juice and submerge the spout of the faucet inside it. This will allow for the inner areas of the faucet to soak in the cleaning solution and soften the limescale.

Keep surfaces dry

Once you get rid of limescale, stay on top of limescale build-up by preventing water from accumulating in these areas. When you’re doing using the sink, wipe off excess water from the faucet and the sink as well.

Wipe-off residual water from the bathtub and faucets too. This will prevent the minerals present in the water from accumulating and forming limescale build-ups.

Need a long-lasting solution against limescale?

Let’s face it, keeping up with the constant wiping, cleaning, and scrubbing can be a huge pain.

Which is why Forrest Anderson is here to help.

We provide a long-lasting solution against limescale build up with a soft water system. Our smart plumbing solutions and expert knowledge mean we’re always ready to provide the best solutions for you to get rid of limescale.

Contact us today to learn more about a permanent solution to limescale.

How House Pressure Regulators Can Help with Gardening

House pressure regulators can be a great solution for your gardening needs. They control the output of water to your desired levels, making the gardening work proceed efficiently. This article will give you tips on how you can use a pressure regulator to help with gardening.

Drip Irrigation

House pressure regulators are great for controlling the flow of water during drip irrigation. You can position the regulator right after valves or shut off points to supply the correct flow of water to the soil and plants. Positioning them in this manner also prevents damage from the constant flow of water for long periods of time.

Your drip emitters will also be secured from popping out as a result of using pressure regulators (too much water hitting the emitters over a long period of time normally causes them to pop out and require replacement).


Sprinklers are another popular solution for gardening. Installing a house pressure regulator to your sprinklers can help you correctly water your plants and minimize on wastage. Most sprinklers operate at a certain pressure level and regulators allow you to constantly provide that pressure. In fact, incoming pressure levels from the water source are often too high for most sprinklers, making pressure regulators critical.

Determining Water Pressure of your Inlet Supply

A house pressure regulator can help you indirectly identify what your inlet water pressure is. But how so? First off, if you need to acquire a regulator with high-pressure specifications (often over 30 psi) in order to achieve the flow rate that you desire, then your inlet pressure is most likely pretty high.

Determining the water pressure of your supply is important for purchasing the correct type of hose, sprinklers, and even determining what types of plants that you will grow. High inlet pressure will require tough hosing and resistant sprinklers (despite the functioning of the pressure regulator).


House pressure regulators allow you to do your gardening work even at long distances from the water supply. Because you can maintain the flow of water at the pressure that you desire, you can have your inlet supply coming in from near or far with few consequences for your plants. Therefore, regulators give you the flexibility of laying out your garden without the limitations of the native pressure coming from the water source.

Durable Solution

House pressure regulators are highly durable. They are made of tough plastic and metal, making sure that your gardening requirements run smoothly. Once you purchase one, you can be sure that it will serve you for a long time.

Questions about House Pressure Regulators?

Need solutions to water and plumbing issues? Our expertise in the industry, as well as our ability to provide leading products in the 21st century, makes us stand out from the competition. Our smart solutions and expert knowledge on water systems mean that we’re always prepared to help. Contact Forrest Anderson today if you have questions about if you need help buying and installing one.


Gas Lines for Outdoor Fire Pits

Outdoor fire pits are a great addition to any backyard or outdoor space. They have great aesthetic appeal and add a lot of comfort and creativity without using a single piece of wood. Of course, in order to achieve this, you would have to run a gas line to your fire pit. This article will show you the ins and outs of gas lines for outdoor fire pits.

Running the Gas Lines

Depending on your location, there may be requirements to obtain a permit in order to run or extend a gas line.  This is to ensure safety standards are being met and, if the house is ever sold, the new owner will be aware of the modifications that have been made.

There are several options for running gas lines. You could run them along the perimeter of the basement or dig a trench outdoors. What option you choose will depend on the restrictions of your current location and the setup of your home.

Size of the Gas Lines

Another area that often needs attention is when figuring out what size of gas lines to use for your fire pit. While making this decision there are many There are a lot of variables involved in this decision, such as the size of the pit, length of the lines, gas pressure and the type of gas that will be used. You need to also consider other appliances around your home that are operating off of the same gas supply.

Most fire pits have recommendations for incoming gas pressure and flow. Other decisions such as length and size of the lines will depend on where your pit is located.

Material used for the Gas Lines

Gas lines come in different types of material, ranging from copper to black and galvanized pipe. Different materials require different specifications for operation. For example, to minimize the risk of corrosion properly coat and tape the black pipe. Copper is also increasingly becoming a less popular choice due to this same risk of corrosion and the higher likelihood of leaking.

Regulators should also be properly installed on the gas lines to control the rate of flow and pressure of the gas.

The Type of Gas used

Many fire pits can run on either propane or natural gas. Gas lines for propane are often more portable because they only need to run from the propane tank to the location of your fire pit. This also adds flexibility to your setup because you can shift your fire pit to different locations around your home.

If using natural gas, you would need to hook up the gas lines to the natural gas supply of your home in a more permanent structure. Natural gas is, however, cheaper, and the setup lasts for longer than propane.

Location of the Fire pit

For safety concerns, we recommend you locate your fire pit away from flammable surfaces and items. While gas fires do not emit sparks or other flying materials, they do contain a lot of heat that can melt nearby delicate surfaces. Always refer to the guidelines of your location regarding open fires on private property.

Summing up

Need solutions to water, plumbing and HVAC issues? Our expertise in the industry, as well as our ability to provide leading products in the 21st century, makes us stand out from the competition. Our smart solutions and expert knowledge on plumbing systems means that we’re always prepared to help. Contact Forrest Anderson today.


How to add a BBQ Sink

Adding water access to your BBQ rig is a great way to make the grilling process run smoothly. No more constant trips indoors and back carrying containers of water. But while this sounds like a great idea, just how can you get it done? This article will share tips on how you can efficiently install a BBQ sink to your rig and keep getting your grill on!

Choose the right BBQ Sink

The first step is to choose the right type of sink that will suit your BBQ setup. You have the freedom to choose from many different shapes and sizes. As for the material, stainless steel is the obvious choice. For an outdoor setup, it is durable, hygienic and convenient for use. The material is important because you definitely want to avoid rust building up on the surface of the BBQ sink.

Identify where you want the Sink to go

Each grill setup is unique. It is, therefore, important for you to identify where you would like your sink to be located. That way you can begin to plan out how you will add water access. Typically, adding the sink to the front or the sides of the BBQ rig can make it easily accessible and less intrusive on the rig itself.

Identify a Source of Water

There are many ways to which you can add water to the BBQ sink. One way to do it is to run a supply pipe designated for outdoor use from the indoor pipes. You can install the supply pipe by joining it to the indoor supply, installing several shut-off valves along the length, and sloping them slightly to enable the pipe to drain.

Another way to do it is to connect a garden hose to the inlet of the BBQ sink and regulate water coming in from the source of the hose. This makes it quick and convenient to gain water access.  A third way to do it is to install a tank underneath the BBQ sink that can act as a reservoir water source if you do not have access to a direct source. The size of the tank will depend on your needs and the size of your BBQ rig. Once you have the tank installed, all you need is to add an inlet pipe going towards the sink and a drainage pipe (discussed below).

Install a Drainage Pipe

Of course, you can’t have a BBQ sink without figuring out where the water will drain. The first step is to hook up a pipe that connects to the bottom of the sink where the water is draining. But where will it drain to? There are several options to consider.

You can install a wastewater tank, which you can drain anytime it fills up. Another option is to run the drainage pipe back into the indoor plumbing system (this step is more involving but it allows you to use your sink much like you would an indoor sink). You could also set up a dry well where the waste will run into. If you choose this option, be selective of what you will drain down the sink because there is the risk of the dry well having an unattractive smell as it continues to fill up.

Summing up

Need solutions to water, plumbing, and HVAC issues? Our expertise in the industry, as well as our ability to provide leading products in the 21st century, makes us stand out from the competition. Our smart solutions and expert knowledge on water systems means that we’re always prepared to help. Contact Forrest Anderson today.


How to Change an Air Filter

When you own a home, there’s always simple maintenance that needs to be performed. You have to change light bulbs, maintain the yard, clean the pool…and change an air filter from time to time. Most of these can happen pretty quickly on your own if you have a little time and knowledge. And when it comes to air filters, you probably won’t even need any special tools. Here’s the down and dirty on the DIY of changing your home air filter.

Locate Your Air Filter

The first thing to do is identify where your air filter is. It can be on either floor of a multi-story home (or even on both). It could be in the ceiling, behind a door, or behind an intake vent on the wall. What it shouldn’t be is hidden since your air filter is where air is brought into the HVAC system.

Determine the Size Filter You Have

Once you know where the air filter is, you’ll want to open the compartment and find the size of the existing air filter. Some HVAC systems have more than one, especially if the intake is located behind something that resembles a closet door. And they could be different sizes, so note that.

You won’t need to measure the air filter. Instead, look along the side for the measurements. There will be three: the length, width, and depth. Write down these numbers, as you’ll need them when you go to the store so you can buy replacements.

Choose Your New Filter

You have a few options when it comes to purchasing your new air filter. While you have to get the size you need, it’s the quality that will differ. There are very inexpensive air filters that are just a few dollars each. Then there are the expensive ones that filter out pet dander and allergens. Besides price, the other difference is how often you’ll need to change an air filter. The cheaper ones need to be switched monthly; higher-quality options get changed quarterly.

Remove the Old Filter

Okay, so you know where the filter is located, and you’ve already looked at it to get the size, so this part should be easy. Just take out the filter. Be sure to carry it directly outside to the garbage bin. Do not pass go, and do not collect $200. If you put the dirty filter down, all of the dust captured on it is likely to transfer to your table or floor. And that makes a big mess. Believe us on this one.

Put in the New Filter

If you want to add some good smells to your home, consider adding some essential oils to the filter before installation. Adding aromatherapy to an air filter will freshen up the whole house.

It’s important to notice the direction of the arrows on the filter when you change an air filter and install it correctly. The arrows will say “airflow” and the direction in which airflow should go. Remember that the filter goes at the intake of air, so air flows into it. Because it’s an air conditioner, some people mistakenly think the flow of air is out, but that’s not the case at the filter.

Secure the filter, and you’re good to go! Now just add a reminder to your calendar to change the filter when recommended based on the type you purchased.

Change an Air Filter, Schedule Your Annual Inspection

During those summer months when you’re constantly running your A/C it’s a good idea to change an air filter once a month. The cheap filters can only handle so much and the high filters are gathering so much dander and dust they fill up quick and start to restrict your homes air flow. And if your home has carpet floors rather than tile or wood, then you will need to change your air filter more often too.

If you can’t remember the last time you purchased an air filter, it’s probably time to call a professional for an HVAC inspection. The team at Forrest Anderson will come out to your home and conduct a thorough inspection to see how your system is performing. Don’t get stuck thinking, “Maybe our AC system will last one more season.” Instead, rest easy knowing everything is in tip-top condition. Call now to schedule!


BBQ Gas Line Installation Guide

The telltale signs are there.  The restless feeling that won’t be relieved until you remember where your hammock got packed last fall. The siren call of summer is here and it’s past time to fire up the old barbecue. And it’s never too late to “up” your grilling game with a BBQ gas line installation. You want to always be ready to fire up the grill at a moment’s notice.

An Easy Guide to BBQ Gas Line Installation

To begin, while there is a lot to be said for traditional charcoal briquettes, but quick and clean are not to descriptive terms that jump immediately to mind.  A different set of problems exists for propane tanks as well.  Clunky, bulky, and always empty on the day of the big game, propane gas owners have their own reasons for improving this year’s grilling season. Learn everything you need to know to when running a gas line to a BBQ.

Before you start installing your BBQ line, it’s necessary to review your natural gas capacity, local permitting requirements, and municipal codes.  In addition to risking a fine for unpermitted work, a major part of the permitting process involves certified inspections designed to ensure proper BBQ gas line installation.

You’re are dealing with something with the potential to explode.  Make sure you cross all your “T’s” and dot your “I’s” when it comes to adhering to local building codes.  Homes not up to code can prove hazardous to you, your family, your home, and your neighbor’s property.

The restrictions often include requirements regarding how far from utilities and structural units you must run your gas lines. Or how deep to bury them.  You may learn all you really need to do is install a quick shut-off valve that will only be used when you grill.  Lastly, a give your HOA a quick call. The HOA can give you recommendations on the types of grills approved for your home community.

Call Before You Dig

Also, call your local utility company before you start to dig and install the BBQ gas line. This is a best practice because they may need to come out and turn your gas on and off during the installation.  Connecting gas lines require specialized tools, valves, pipes, and supplies to successfully install into your BBQ.  Seeking out expert help is critical to safely outfit your patio grill with a continuous flow of natural gas. Consulting an expert also ensures you and your family will be able to safely use the grill all season long.

Call Our Expert Team for a Great BBQ Gas Line Installation

If you are looking to upscale your barbecue experience this summer with a permanent supply of natural gas, you need to call our professional staff to assess your needs and explore the best options for tricking out your backyard barbecuing experience in ways you never thought imaginable.  There is no reason to put off those summertime dreams when we can devise a safe, efficient, and cost-effective plan. Guaranteeing to turbo charge your backyard summertime fun.  If you have questions about the best way to install your BBQ gas connections, contact us today to get the scoop on how you will never need to run out for propane or charcoal briquettes ever again.