Mogami Gold Stage Mic Cable with Neutrik XLR Connectors is an ultra-rugged, “roadie proof” cable offering killer sound for active stage performers. Separating Mogami Gold Stage from other cable brands is unique cable cores with three times the number of copper strands compared to a typical high quality cable. The higher the stranding the less likely the cable is to break when handled. Two of these 105 strand cores are covered with a comprehensive full-coverage braided shield. This forms the basis of a nearly indestructible, yet highly flexible cable that offers transparency and accuracy unequalled by other brands.
Grilled food can really hit the spot on nice Arizona days. Before you use your BBQ, make sure that you keep these grilling safety tips in mind. This helps ensure that you and your family can enjoy grilled dinners without any trouble.
Store Propane Tanks Properly
Grilling safety involves storing propane tanks properly. Tanks for gas grills can easily become a hazard. Store these tanks in a vertical and upright position. Also make sure they are kept far away from any heat or ignition sources, such as lighters or matches. If you have a gas line for your grill, you don’t have to deal with propane tanks at all.
Turn the Grill on Safely
Another important grilling safety tip is to make sure that you turn the grill on correctly. This involves opening the lid and turning the propane on. After this is done, turn the knobs for the burners, then push the ignition. Doing this the right way lowers the risk of fires and other accidents.
Never Use Lighter Fluid
Never use lighter fluid to ignite a gas grill. Lighter fluid is a major fire hazard when it isn’t used properly. You will avoid having to worry about this if you have a gas grill with its own natural gas line installed.
Check for Leaks
Gas leaks can occur when you use propane tanks for your grill. You should check for leaks by putting a solution of water and light soap on the gas tank hose. If you see bubbles, this means you have a gas leak that needs to be fixed by a professional right away. Grills with a gas line have a lower risk of ending up with these leaks.
Don’t Reignite Right Away
If your grill doesn’t ignite, don’t light it again right away. You could have gas in the air that needs time to clear out. Lighting it again immediately could result in a fire and serious injuries. Wait for 5 minutes before you try to ignite your gas grill again.
Keep Your Grill Clean
Grilling safety includes making sure that your gas grill stays in good condition. Grease and other debris can build up over time, which can increase the risk of a fire. Clean debris off your grill and from the tray under it. You should wait for your grill to cool before cleaning it. Getting into the habit of doing this after using your grill each time means you won’t have to scrape a lot of debris off later on.
Turn Your Grill Off Properly
When it comes to grilling safety, it’s important to ensure that you turn your grill off the right way. This reduces the risk of injuries and accidents. You’ll need to turn the gas tank off before shutting off the gas burners. Make sure that your propane cylinder valve is fully closed to prevent gas from leaking. With a gas line grill, all you have to do is shut it off without having to deal with any tanks.
If you’re ready to install a gas line for your grilling area, contact Forrest Anderson. We can ensure that this is done properly for your safety.
Many homeowners aren’t familiar with the different parts of an HVAC system. Although you should let HVAC professionals handle problems with your system, it’s helpful to know some of the most important parts. This can help you understand what’s going on if you have issues with your heating and cooling system.
The blower motor in your HVAC system is the part that blows heated or cooled air into your home. When this motor kicks in, it pushes this air through your ductwork, which allows it to reach all parts of your home. Blower motors are available in conventional and variable speed models.
Blower motors can run into problems that affect how well your HVAC system heats or cools your home. Problems with the blower motor include having it run too often or having it not start at all. HVAC technicians should check this part of your HVAC system to make repairs or replace it if needed.
A compressor, or condenser coil, is an HVAC component that helps keep your home cool. Heat pumps and central air conditioning systems have these outdoor units. Compressors send heat into the air outside and cool homes by condensing refrigerant.
Compressors are prone to having problems when airflow through these units is obstructed. This can happen when you have leaves or other vegetation around the unit. Shrubs or bushes can also obstruct compressors. Have HVAC technicians do maintenance on your compressor to keep it in good condition.
Evaporator coils are important components inside heat pumps and central air conditioning systems. This coil contains refrigerant that absorbs heat and sends it back into your home as cooled air. This component also helps lower the humidity in your home.
Evaporator coils can have too much moisture on them, resulting in mold growth. These coils can also become frozen if you have any refrigerant leaks. Mold and ice can lower your air quality and even cause your HVAC system to break down. Have these coils cleaned and maintained to prevent this.
The combustion chamber in a furnace is also known as a burner. Gas and air enter this part of your furnace, which causes a pilot or electronic ignition to start. In some furnaces, there is also another combustion chamber. This chamber catches and compresses unburned fuel and carbon monoxide. The result is a furnace with better efficiency.
Problems with the combustion chamber usually involve the way it ignites. Electronic ignition systems can be damaged or may malfunction. Pilot lights can go out or end up letting carbon monoxide into your home. It’s important to have an HVAC technician check and repair any problems you have with the combustion chamber in your HVAC system.
Furnaces, including electric and gas models, have a heat exchanger that is used for warming up cooler air. This part of your HVAC system is what generates heated air to keep your home warm in winter.
Heat exchangers are made to be durable. However, they can develop cracks that could cause a carbon monoxide leak inside your home. Regular HVAC exchanger inspections can help prevent cracks and leaks.
Whether your HVAC system is louder than usual or just won’t start, contact Forrest Anderson today for service.
Although Phoenix is known for its hot summers, the chilly desert nights leave people in the Valley appreciating their home heating systems each winter. Having a reliable home heating system is important so you can stay comfortable throughout the season. Before choosing a new system for your home, consider the pros and cons of some of the top options.
Furnaces are a common type of home heating system. They’re available with different heat sources, including electricity and gas.
Electric furnaces use an electrical element, such as heating strips, to warm up your home. These furnaces can be a good option if you don’t have a gas line running to your property.
- Pro: Electric furnaces typically have lower installation costs than heat pumps.
- Pro: Electric furnaces don’t have the potential safety issues that gas furnaces have. This can make them a safer option for Phoenix homeowners.
- Pro: Electric furnaces are generally more energy-efficient than gas furnaces.
- Con: These furnaces can cost more to operate due to the higher cost of electricity compared to gas costs.
- Con: Electric furnaces can have a difficult time keeping homes well-heated if temperatures drop below freezing.
Gas furnaces are home heating systems that use a heat exchanger to warm up air. The air is then circulated throughout your home.
- Pro: These furnaces generally cost less to install than other types of home heating systems.
- Pro: Gas furnaces tend to last longer than heat pumps and other heating systems.
- Con: These furnaces depend on fossil fuels to operate, making them less environmentally friendly.
- Con: Gas furnaces can create safety hazards, such as carbon monoxide leaks.
Many Phoenix area homeowners use heat pumps to warm their homes in the winter. This system works by transferring warm area from one area to another. If needed, these systems can warm up the air more before having it circulate to different parts of your home.
- Pro: Heat pumps don’t rely on fossil fuels, such as gas, which makes them a cleaner source of energy.
- Pro: These home heating systems do double duty by acting as air conditioners during the summer. In this case, the process switches and they pull hot air from inside your home and move it outside to cool off the interior.
- Pro: Heat pumps generally use less electricity than electric furnaces.
- Con: Heat pumps don’t usually last as long as furnaces since they run more often in order to heat and cool homes.
- Con: Heat pumps aren’t as efficient at heating homes when temperatures drop too low. A backup source of heat, such as electrical strips, can kick in to warm up homes. This can raise energy bills.
Other Types of Home Heating Systems
Furnaces and heat pumps aren’t the only types of home heating systems available. Phoenix homeowners can also have radiant baseboard heat or radiant floor heating systems installed. These systems use electrical or water sources to heat homes. While these home heating systems are less noisy than furnaces and heat pumps, they also typically cost more to run and are quite rare in the Valley.
Rely on the Professionals
When choosing your next home heating system, consider the cost of fuel and the efficiency of the unit to help determine which option will be more cost-effective. The team of trained technicians at Forrest Anderson will work with you to understand your needs and create a solution that’s right for you.
Whether you need to replace an outdated system or you’re looking to increase your energy efficiency, we’re here to help. By understanding how you use your heat today, we can recommend a replacement system that’s energy efficient and offers you the comfort you desire.
Are you thinking of replacing or upgrading your HVAC system? Contact Forrest Anderson to discuss which home heating system would be best for you.
In recent years, a new hot water heater became a little more expensive. New energy guidelines are the biggest reason for the price increase. In the short run, this means a new water heater purchased after April 2015 will cost more. In the long run, you could be saving money on your utility bill.
Heating water is the second largest energy expense in most homes. It’s no surprise that purchasing a new hot water heater that follows strict energy guidelines can save you money on your utility bills while being better for the earth. According to the Department of Energy, one of the reasons the manufacturing and design guidelines were updated was to reduce the amount of carbon dioxide emissions.
If you’re in the market for a new hot water heater, consider the impacts of the Department of Energy’s requirements. While your new heater may be better for conservation, the heater itself may change in terms of size and cost.
Size of the Water Heater
While the size of your new hot water heater may not increase the price tag too much, it can impact the location your unit will fit. Many homeowners have just enough space set aside for their existing heater. Unfortunately, some of the new water heaters may increase in size by a few inches in diameter. This could cause you to have to relocate your heater if it doesn’t fit where your old one sits. Talk to your plumber before you purchase a new unit to make sure it will work in your space.
Unfortunately, new standards often bring higher price tags. Energy-saving technology is great for the environment and can even save you some money on your utility bill. However, it will cost more upfront.
Depending on your unit’s brand, model, size, and maintenance, it could take anywhere from two to ten years to offset the price tag of a super-efficient model. Talk with your plumber to determine if the energy savings outweigh the price tag.
Plan for Your Purchase
If you have a space for your old water tank and you know the new tank isn’t going to fit, you’ll need to do one of the following options:
- Make your space bigger, if possible.
- Downsize your water heater tank size.
- Relocate your new hot water heater somewhere else in your home.
Talk to your plumber to determine which option makes the most sense. Depending on the size of your family and the layout of your home, some options may be more suitable than others. For example, a family of two could get away with using a smaller tank size than a family of six.
Consider What You’re Getting
Water heaters are becoming more advanced. Just because you had one installed a decade ago, doesn’t mean a new one will work the same way. You will need to:
- Learn how to operate your new hot water heater.
- Hire a plumber to install your heater safely and correctly.
Although a new hot water heater is an expensive purchase, consider what you’re getting. You probably don’t think about how much you rely on hot water until it breaks down. From taking a nice hot bath to washing your hands with warm water and from doing a load of laundry to running your dishwasher, hot water is a modern-day convenience many of us don’t go a day without using.
If you have questions or are ready to schedule the installation of your new hot water heater, contact Forrest Anderson.
If you recently had to buy a new water heater, then you know how costly they can be. The good news is that with regular maintenance and inspection, you can make sure your purchase lasts as long as possible. Keep the following tips in mind for maintaining a water heater.
New Water Heater Life Expectancy
Water heaters can last for several years with regular maintenance and inspection. According to manufacturers, conventional water heaters have a life expectancy of eight to 12 years. Tankless water heaters can last as long as 20 years.
Whether you can’t remember when you purchased your water heater or you just moved into a new home and are unsure of the age of your unit, Forrest Anderson can help. Give us a call and share your make, model, and serial number and we’ll be able to find the year for you.
Conventional Water Heater Maintenance
Water heaters with a tank are also called conventional water heaters. They require maintenance tasks from time to time; otherwise, your water heater won’t be able to do its job. You’ll also have a higher chance of it breaking down without proper care.
Adjust the Temperature
One way to monitor your conventional water heater is by adjusting the temperature setting from time to time. If your unit is in your garage, it probably doesn’t need to be set as high in August, since the outdoor temperature will naturally warm your unit. Lowering the temperature on your heater can save you money on energy costs. As the temperature cools off, you’ll want to make sure your heater’s temperature remains in a safe zone, so your water isn’t so hot that it scalds you.
Drain the Heater
Most manufacturers recommend draining your water heater at least once per year. This cleans out any sediments or minerals that are inside the tank. The draining process involves shutting off the water supply to your heater and using a hose to drain it. If you’re unsure of how to do this, it’s a good idea to let a professional plumber do it for you. While they’re at your house, they can inspect any plumbing issues you may be having as well.
Inspect the Pressure Relief Valve
Once a year, you should have your water heater’s pressure relief valve inspected. A plumber can quickly check to see if there’s a leak. Fixing this is as easy as replacing the valve.
You can do your part in taking care of your new water heater by making sure that there’s enough open space around it. How much space depends on your unit. Most gas water heaters require at least two feet of service clearance. Electric water heaters may not have a minimum clearance requirement. However, there may be codes that recommend workspace clearance. Your plumber will review the manufacturer’s recommendations in the instruction manual as well as follow any local requirements.
Replace the Anode Rod
Your anode rod helps prevent your water heater from rusting. A plumber should check this every three years to determine whether or not your heater needs a new rod. If it’s worn out, covered with calcium deposits, or damaged, your plumber will recommend replacement. This will help your tank continue to run at its optimal level.
Tankless Water Heater Maintenance
Although tankless water heaters don’t hold gallons of water like their conventional counterparts, they still require regular maintenance.
Tankless water heaters can have mineral buildup, which can affect their life expectancy. This is common in areas that have hard water. Descaling is an important maintenance task that removes mineral buildup. Hiring a plumber to handle this job helps ensure that the buildup is fully removed.
Flush the Heater
When you have a new water heater, you’ll need to flush it from time to time. Flushing a tankless water heater helps keep it in good condition for years by clearing out any scaling or sediments. Since this process involves turning off power and water, it’s best to leave it to the professionals. During their visit, they can also check your fans, filtration, vents, and other components.
Just like regularly changing your vehicle’s oil prolongs the life of your car, proper water heater maintenance can lead to longer functioning as well. If it’s time to schedule maintenance for your new water heater, contact Forrest Anderson today.
Managing a commercial space has a lot of working parts. Your employees and customers are likely to alert you as soon as they notice a heating or cooling problem. Luckily, the Commercial Services team at Forrest Anderson has been specially trained to fix your commercial HVAC problems so we can take some of the pressure off of you.
A working air conditioner is mandatory during our 110-degree summer days. A commercial HVAC unit is typically much larger than what you’ll find in your home because it has a lot more space to cool. Just like your home unit, commercial systems range in size and features. Some key elements of a commercial HVAC include:
- Multiple thermostats
- More wires and complex parts
- Modular system to allow for fluctuating company needs
While the idea of heating and cooling a building remains the same between a business and a home, the building structures are often very different. The HVAC system and delivery of air need to reflect the differences. Clean air at a comfortable temperature is important for workplace safety and satisfaction.
Commercial HVAC Problems: What Can Go Wrong?
Commercial heating and cooling systems are designed to provide reliable operation for a long time. Just like anything in your business, eventually, things will need repairs. Here are a few of the commercial HVAC problems you may encounter.
- Age. Commercial HVAC systems have a lifespan. Over time, any number of components – belts, bearings, motors – can begin to fail. Regular maintenance and repair can keep these in optimal condition for as long as possible.
- Circuit breaker. If something blocks the airflow, your unit’s blower may work overtime and end up tripping the breaker.
- Dirty condenser. Clogged or dirty evaporator coils can significantly reduce HVAC efficiency.
- Dirty filters. Commercial HVAC filters should be changed regularly. During the summer, you should replace them monthly. Depending on your type of business, you may want to change your filters as frequently as once per month year round. Dirty filters can restrict airflow or cause the system to overheat.
- Ignition. Normal use and age can degrade burners, flame sensors, or the pilot light. Regular maintenance can help these last as long as possible.
- Minimal maintenance. You can avoid many problems when you partner with a local HVAC company for regular maintenance. During your bi-annual maintenance, your technician will check, inspect, and test your system to ensure everything is ready to work as the new season approaches.
- Noises. Strange noises coming from your HVAC unit are its way of calling for help! If you hear an unusual screeching, popping, or banging noise coming from your system, it’s worth investigating right away. A service technician can diagnose and repair the problem.
- Nonstop blower. If the thermostat is set to the “auto” position and you hear the blower running nonstop, your fan may be stuck.
- Thermostats. Drained batteries are often the cause of commercial thermostat problems. If you haven’t replaced your batteries in a while, it may be time. Many manufacturers recommend changing the batteries once per year, or sooner if the low battery indicator appears on your digital display.
- Water leaks. If you notice water pooling around your unit, call your HVAC professional right away. Over time, HVAC drain lines can clog or crack. Water leaks can also indicate trouble with the collector box, heat exchanger, or evaporator.
Just like your home system, the best way to handle commercial HVAC problems is to prevent them from happening! Forrest Anderson offers heating and cooling maintenance agreements, keeping your employees and customers comfortable all year long. You can have peace of mind knowing that certified professionals maintain your system.
Phoenix Businesses Partner With Forrest Anderson
In the business world, time is money. Don’t waste any more of your valuable time struggling with commercial plumbing or HVAC problems. Often, emergencies take longer (and cost more) than regularly scheduled, professional maintenance.
Contact Forrest Anderson to schedule a no-obligation consultation or to learn more about our maintenance agreements. It’s a partnership that can save your company money in the long run.
Taking the edge off the chill in a room or two by relying on a portable heater is a time-tested way to increase comfort when temperatures drop. While it’s effective, it’s not the most economical approach, since these heaters use far more electricity than the central heating and cooling system.
Cold rooms often indicate something’s amiss with the central heating and cooling system, and a portable heater is a good way to provide heat on a temporary basis.
A portable heater that uses electricity for heating is safer than unvented combustion heaters to use indoors. You’ll find electric heaters as
- Boxy fan heaters
- Radiator-style heaters
Safety Is Essential with a Portable Heater
- More important than their shape, however, is their safety. If you have children or pets, choose a radiator-style portable heater. Even on high, it won’t get hot enough to burn tender skin. Regardless of the style, the heater should bear the UL (Underwriter’s Laboratory) label on its cord and packaging.
- The heater should have an automatic shutoff switch in case it tips or falls over.
- Avoid unvented gas, propane, or kerosene heaters altogether. You’re putting your safety in the hands of oxygen sensors and anti-tip switches that can fail.
Convenient Features to Consider
- Thermostats on the heaters help you regulate the temperature in the room. It could be as simple as a dial that indicates low, medium and high heat.
- Timers are not only convenient, they’re energy savers. Should you forget to turn off the heater off, the timer will do it for you.
- Handles or wheels. Handles make moving them from room to room easier and more convenient.
Energy Efficient Options
There is no such thing as an energy efficient portable heater. The heater is likely to cost much more than heating the room with a heat pump or gas furnace will. Unless it’s a temporary measure, instead of investing in space heaters and paying top dollar for heating, consider using that money to find the cause behind those cold rooms.
The problem might lie with your HVAC system unless it’s inadequate insulation or a large air leak. A cold room in winter translates to a hot one in the summer. If the furnace isn’t working right, odds are the A/C won’t either. Investing the money into fixing the problem will pay you back now and in the summer with lower conditioning bills and a much more comfortable home.
Although it could be a mechanical problem, more often than not, inadequate heating in a particular area is associated with ductwork design imbalances or distribution problems. Depending on the material from which they’re constructed, ductwork sections can break apart, kink, clog with excessive debris, or tear. Ductwork problems can occur at any time and homes of all ages are vulnerable.
Any of these signs can indicate ductwork leaks:
- Cold temperatures in one or more rooms that are close together.
- Dust or dirt that collects near a register cover on the wall or ceiling.
- Low air pressure coming from the duct in a room when the HVAC system runs.
Leaking ducts waste tremendous amounts of energy since the air leaks into places where you don’t need it.
If you’d like more information about identifying HVAC issues that might be compelling you to use a portable heater for cold rooms, contact Forrest Anderson. We want to get people’s units working correctly so they’ll save money and have a unit that works all year round.
Home automation has exploded in popularity over the past few years. Whether you want to organize your home, order something, or adjust the temperature in your home, you can do all of it with your voice or even with pre-programming. Making your life easier is as simple as getting the right kind of home automation, and this technology makes great gifts for the people you care the most about.
Remembering to turn the lights on and off can be a chore, especially when it is difficult to get just the right light level. Several companies now make smart lights that are sometimes as simple as a few bulbs and a device that works with Bluetooth or the Internet. You can use these lights to make your home a little dimmer when your eyes are getting tired. Or to make your home brighter when you want to focus on something. You could even to turn them on and off to help you navigate.
There are apps available that let you turn on the lights to make it look like you are home for added security, too. These can be manual or activated from your phone anywhere in the world. You can also pre-program them to go on and off based on the time of day or the light levels outside.
For years, there have been devices that you plug into the wall and can then plug appliances into that let you set their on and off times.
Nowadays, there are some amazing advancements in this type of home automation because you can activate them from your phone.
Using apps, these smart power stations let you turn on a lamp, a sound system, your TV, or anything else you want to plug in. This can make it look like you are home, entertain your pets, or make your home more inviting.
Voice and Accomplishing Everything
There was a time when everything was on a dial, a switch, a button, or a knob. While this made life far more convenient than having to light oil lamps and stack wood in a fireplace, the modern world is even better. These days, there are a host of different home automation systems that allow you to activate virtually anything in your home.
Whether you want to look up something, place an order, make calls, send texts, do searches for news stories and recipes, or even get some extra poinsettias delivered to your home, you can by simply talking to the system. You can also combine this voice command with other smart home devices for an almost sci-fi level of control over your home.
Early Warning System
Do you ever wonder if the car you just heard means someone is coming to the door? Now there are sensors that can trigger cameras to let you know if it is the pizza guy, your in-laws, or an intruder. What you do with that information is up to you.
Warming and Cooling
Your heat and AC are easy to adjust — when you are home. Interestingly enough, there are now apps that work on your thermostat, so you can adjust the temperature on your way home or if you have to stay away late.
Getting Help With Home Automation
Do you want help with your heating and cooling being automated, but are unsure where to start?
Contact Forrest Anderson today and we’ll recommend the best options for your home and your needs. There are plenty of ways home automation can make you and your family’s lives much better.
Many people forget that thermostat vacation setting is an important way to save energy and money while they are away from home. The same principles can even be applied while you are away at work. However, you will notice the savings most of all when you are away for a week or more at a time.
Keeping the System Running
A lot of homeowners think turning off the system entirely will save the most energy. This is technically true, but there are problems with this. Primarily, turning off your air conditioning can cause your home and its contents to suffer heat-related damage from the blistering Arizona heat. In addition to this, your AC also filters and circulates air throughout your home. After a while, this can lead to a stale smell and the accumulation of dust more quickly. As well, most AC units actually function better and more efficiently when they operate over long periods of time. Because of this, turning up or down the temperature with your thermostat vacation setting is better than turning off the system.
Heat: Rarely a Thermostat Vacation Setting Issue
It is important to remember that even if you do leave during the winter months, Arizona is not known for excessively cold temperatures. The area rarely freezes, even in the depths of winter. When you consider your thermostat vacation setting, nine times out of 10 you will only be concerned with ensuring that your home stays reasonably warm in the winter.
A Few Degrees of Temperature Separation
When you think about your thermostat vacation setting, you need to think about the golden mean. On the one hand, adjusting too high can leave your home sweltering. Further, it can put the system through a difficult time when it is time to cool your home back down. Because of this, only adjusting the temperature upward four to 6 degrees is the ideal thermostat vacation setting. This keeps the system from over-working while keeping the system functional throughout your time away from home.
Pet Concerns While You’re Away
One issue that some people forget until it is too late is their pets. Often, having furry friends that you may not take on vacation leads to a dilemma about the settings. Keeping the temperature in your thermostat vacation setting only a few degrees warmer keeps your pets from sweltering while continuing to save you money on cooling. It may be wise to put out extra water or ask your house-sitter to do so. It’s important to ensure your pets do not become dehydrated in the higher temperatures.
Smart Options for Your Thermostat Vacation Setting
Programmable thermostats were one of the best money-saving inventions of the 20th century. They allowed you to set your thermostat based on a plan for when you would leave and come back. However, they have been eclipsed by the newer technology of smart thermostats. A smart thermostat is a way to both pre-set your thermostat and to be able to adjust it from anywhere in the world using your smartphone. If the vacation plan changes, your thermostat vacation setting can also change.
Getting Help When You Need It
Sometimes the issue of thermostat vacation setting can get confusing. If you are not up on smart home technology and using smart thermostats, you may need some help. Getting in touch with Forrest Anderson can be a wise move, as the professionals can walk you through all of it.