Dignity Yoast test 🍉 ggggg

Mogami Gold Stage Mic Cable with Neutrik XLR Connectors is an ultra-rugged, “roadie proof” cable offering killer sound for active stage performers. Separating Mogami Gold Stage from other cable brands is unique cable cores with three times the number of copper strands compared to a typical high quality cable. The higher the stranding the less likely the cable is to break when handled. Two of these 105 strand cores are covered with a comprehensive full-coverage braided shield. This forms the basis of a nearly indestructible, yet highly flexible cable that offers transparency and accuracy unequalled by other brands.

Grilling Safety: Propane BBQ Edition

Home » High Water Pressure

Grilled food can really hit the spot on nice Arizona days. Before you use your BBQ, make sure that you keep these grilling safety tips in mind. This helps ensure that you and your family can enjoy grilled dinners without any trouble.

Store Propane Tanks Properly

Grilling safety involves storing propane tanks properly. Tanks for gas grills can easily become a hazard. Store these tanks in a vertical and upright position. Also make sure they are kept far away from any heat or ignition sources, such as lighters or matches. If you have a gas line for your grill, you don’t have to deal with propane tanks at all.

Turn the Grill on Safely

Another important grilling safety tip is to make sure that you turn the grill on correctly. This involves opening the lid and turning the propane on. After this is done, turn the knobs for the burners, then push the ignition. Doing this the right way lowers the risk of fires and other accidents.

Never Use Lighter Fluid

Never use lighter fluid to ignite a gas grill. Lighter fluid is a major fire hazard when it isn’t used properly. You will avoid having to worry about this if you have a gas grill with its own natural gas line installed.

Check for Leaks

Gas leaks can occur when you use propane tanks for your grill. You should check for leaks by putting a solution of water and light soap on the gas tank hose. If you see bubbles, this means you have a gas leak that needs to be fixed by a professional right away. Grills with a gas line have a lower risk of ending up with these leaks.

Don’t Reignite Right Away

If your grill doesn’t ignite, don’t light it again right away. You could have gas in the air that needs time to clear out. Lighting it again immediately could result in a fire and serious injuries. Wait for 5 minutes before you try to ignite your gas grill again.

Keep Your Grill Clean

Grilling safety includes making sure that your gas grill stays in good condition. Grease and other debris can build up over time, which can increase the risk of a fire. Clean debris off your grill and from the tray under it. You should wait for your grill to cool before cleaning it. Getting into the habit of doing this after using your grill each time means you won’t have to scrape a lot of debris off later on.

Turn Your Grill Off Properly

When it comes to grilling safety, it’s important to ensure that you turn your grill off the right way. This reduces the risk of injuries and accidents. You’ll need to turn the gas tank off before shutting off the gas burners. Make sure that your propane cylinder valve is fully closed to prevent gas from leaking. With a gas line grill, all you have to do is shut it off without having to deal with any tanks.

If you’re ready to install a gas line for your grilling area, contact Forrest Anderson. We can ensure that this is done properly for your safety.

8 reasons for water pressure problems

Chances are if you’ve owned a house, you’ve dealt with water pressure problems at some point. This can make the simplest tasks like washing clothes, doing dishes, or even taking a shower, incredibly frustrating. The good news is, there are some common reasons for water pressure problems, and most of them are easy to resolve when working with a plumber.

Clogged Aerators

Do you have one specific fixture that has low pressure? If yes, you may have a clogged aerator. These are usually connected to a faucet to ensure that they won’t splash water when they are turned on. Over time, the screen can become blocked by sediments, debris, or calcium deposits.

Corroded Plumbing

Usually, when you’re dealing with corroded plumbing, it’s in an older house. If your home is over 20 years old, you may need to replace the pipes. While this can be expensive, it’s better to handle it when you first notice an issue rather than wait for it to turn into a bigger, more costly, problem.


Believe it or not, leaks can also cause a water pressure issue. Underneath your house, there is a maze of pipes. If one of those pipes is leaking, corroding, or bursts, it can limit the water from reaching its destination.

Master Shut Off Valve

Accidentally adjusting the master shut off valve is one reason for water pressure problems. This is something you may be able to fix on your own. Simply find your master valve and make sure that it’s open enough for the water to run freely. As always, if you aren’t sure what you’re looking at, it’s time to call the professionals.

Mineral Deposits

This is one of the most common water pressure problems. Mineral deposits can build up in your pipes and reduce the amount of water flow to your home. A plumber can assess the situation to determine if cleaning the pipes can improve the situation. In more severe cases, you may have to replace the pipes to fully resolve the issue.

Pressure Regulator

A pressure regulator is a mechanism that controls the flow of water and pressure. A fault in the regulator can cause water pressure problems. If you think yours needs to be fixed or replaced, call the professionals to determine if that is the issue in your plumbing system.

Shared Pipelines

Another reason your pressure might be low is due to a shared pipeline. Whether you’re sharing your pipes with one neighbor or many more, this can cause a significant loss of pressure. Unfortunately, ripping up the entire network to make a dedicated pipeline to your house is cost-prohibitive.

One way to work around this issue is by using water when your neighbors are not. For example, if you work second shift and most of your neighbors are at work in the morning, this may be the ideal time to do laundry, wash dishes, wash your car, and so on. You can also ask your neighbors about any plumbing problems they’re experiencing to determine if it’s an issue greater than just your home.

Water Softener Mechanisms

Some homes have a water softener installed. This treats the water before it is supplied to the house. A water softener shouldn’t decrease the water pressure in your home unless the unit is too small or was installed improperly. Call a technician to inspect your water softener if you think it may be the cause of your water pressure problems.

Call the Professionals

Contact Forrest Anderson if you’re experiencing water pressure problems. A trusted plumber can assess the situation and guide you to an efficient solution.

High Water Pressure and Noisy Pipes

Many people probably consider high water pressure a good thing. However, water pressure that is too high can be more than just annoying: it can cause costly damage. High water pressure is one of the leading causes of water leaks, pipe damage, and wasted water in homes and businesses.

Signs You May Have High Water Pressure

There are several signs you might have a high water pressure problem in your home or business.

  • Multiple water leaks
  • Constantly running toilets
  • Noisy pipes

You might see intermediate leaks occurring at only certain times of the day, leaks in multiple faucets at the same time, toilets that are constantly running, and even noisy pipes!

Water hammers are also commonly caused by high water pressure. The pipes and faucets inside your home are only designed to support a certain amount of PSI. If the PSI is too high, the opening and closing of your faucets cause the water to ram into the faucet. The water then looks for a way to escape, which can cause burst pipes.

Water hammers can also cause pipes’ mounting straps to become loose, causing a lot of noise and rattling when you open and close the faucets in your home.

What Causes High Water Pressure?

The most likely source of your high-pressure water problem is the municipal water supplier. Water companies set the water pressure high to support enough pressure for safety reasons. These include fire hydrants. It could also be for those tall buildings downtown. It takes a lot of pressure to get to the 40th floor!

The recommended water pressure limit on most plumbing supplies is 80 PSI. More often than not, city water pressure exceeds 100 PSI. In some cases, it can even be higher than 150 PSI. And you could be dealing with high water pressure for anything higher than 60 PSI.

If you are unsure about the water pressure inside your home or office, it’s quite easy to check this yourself.

  1. Buy a water pressure gauge
  2. Select a water outlet
    A faucet or hose bib that close to the water supply source will be your most reliable source.
  3. Turn off anything that uses water
    This includes all faucets, washers, sprinklers, and even fridge ice makers.
  4. Attach the gauge
    Screw the fitting end of the gauge into the water outlet you’ve chosen.
  5. Let the water run
    Make sure that you slowly open the valve until it is fully open.
  6. Record the pressure
    Once the needle stops moving, write down the pressure.
  7. Double check
    Test one more time to make sure the reading is accurate. If you get a different reading, make sure all faucets and water-using appliances are off.
  8. Call a technician
    If the pressure is too high, then it’s best to call a technician for an inspection.

How to Fix the Problem?

If you find that you have high water pressure, the best solution is to install a water pressure regulator. A pressure regulator reduces the pressure from the main before it enters the building. This will help to reduce any associated issues, such as water hammers and damaged pipes.

It’s best to install the pressure regulator right at the main instead of at the entrance to the home or office. Putting it there gives the water pressure time to slow. It also protects the water transport system to your property. Also, with the pressure regulator installed at the main, it will control the irrigation system. That means fewer leaks in what are much more sensitive pipes.

High Water Pressure is a Real Problem

If you have been feeling the effects of high water pressure, it’s time to address the problem. Forrest Anderson plumbers are the Phoenix experts in reducing water pressure problems. We can inspect your home or commercial space to gauge the pressure and provide solutions.

Don’t risk ruining pipes or turning your home or office into an indoor swimming pool. Contact us today to schedule your inspection.