How House Pressure Regulators Can Help with Gardening

House pressure regulators can be a great solution for your gardening needs. They control the output of water to your desired levels, making the gardening work proceed efficiently. This article will give you tips on how you can use a pressure regulator to help with gardening.

Drip Irrigation

House pressure regulators are great for controlling the flow of water during drip irrigation. You can position the regulator right after valves or shut off points to supply the correct flow of water to the soil and plants. Positioning them in this manner also prevents damage from the constant flow of water for long periods of time.

Your drip emitters will also be secured from popping out as a result of using pressure regulators (too much water hitting the emitters over a long period of time normally causes them to pop out and require replacement).

Sprinklers

Sprinklers are another popular solution for gardening. Installing a house pressure regulator to your sprinklers can help you correctly water your plants and minimize on wastage. Most sprinklers operate at a certain pressure level and regulators allow you to constantly provide that pressure. In fact, incoming pressure levels from the water source are often too high for most sprinklers, making pressure regulators critical.

Determining Water Pressure of your Inlet Supply

A house pressure regulator can help you indirectly identify what your inlet water pressure is. But how so? First off, if you need to acquire a regulator with high-pressure specifications (often over 30 psi) in order to achieve the flow rate that you desire, then your inlet pressure is most likely pretty high.

Determining the water pressure of your supply is important for purchasing the correct type of hose, sprinklers, and even determining what types of plants that you will grow. High inlet pressure will require tough hosing and resistant sprinklers (despite the functioning of the pressure regulator).

Distance

House pressure regulators allow you to do your gardening work even at long distances from the water supply. Because you can maintain the flow of water at the pressure that you desire, you can have your inlet supply coming in from near or far with few consequences for your plants. Therefore, regulators give you the flexibility of laying out your garden without the limitations of the native pressure coming from the water source.

Durable Solution

House pressure regulators are highly durable. They are made of tough plastic and metal, making sure that your gardening requirements run smoothly. Once you purchase one, you can be sure that it will serve you for a long time.

Questions about House Pressure Regulators?

Need solutions to water and plumbing issues? Our expertise in the industry, as well as our ability to provide leading products in the 21st century, makes us stand out from the competition. Our smart solutions and expert knowledge on water systems mean that we’re always prepared to help. Contact Forrest Anderson today if you have questions about if you need help buying and installing one.

[cta_post]

Gas Lines for Outdoor Fire Pits

Outdoor fire pits are a great addition to any backyard or outdoor space. They have great aesthetic appeal and add a lot of comfort and creativity without using a single piece of wood. Of course, in order to achieve this, you would have to run a gas line to your fire pit. This article will show you the ins and outs of gas lines for outdoor fire pits.

Running the Gas Lines

Depending on your location, there may be requirements to obtain a permit in order to run or extend a gas line.  This is to ensure safety standards are being met and, if the house is ever sold, the new owner will be aware of the modifications that have been made.

There are several options for running gas lines. You could run them along the perimeter of the basement or dig a trench outdoors. What option you choose will depend on the restrictions of your current location and the setup of your home.

Size of the Gas Lines

Another area that often needs attention is when figuring out what size of gas lines to use for your fire pit. While making this decision there are many There are a lot of variables involved in this decision, such as the size of the pit, length of the lines, gas pressure and the type of gas that will be used. You need to also consider other appliances around your home that are operating off of the same gas supply.

Most fire pits have recommendations for incoming gas pressure and flow. Other decisions such as length and size of the lines will depend on where your pit is located.

Material used for the Gas Lines

Gas lines come in different types of material, ranging from copper to black and galvanized pipe. Different materials require different specifications for operation. For example, to minimize the risk of corrosion properly coat and tape the black pipe. Copper is also increasingly becoming a less popular choice due to this same risk of corrosion and the higher likelihood of leaking.

Regulators should also be properly installed on the gas lines to control the rate of flow and pressure of the gas.

The Type of Gas used

Many fire pits can run on either propane or natural gas. Gas lines for propane are often more portable because they only need to run from the propane tank to the location of your fire pit. This also adds flexibility to your setup because you can shift your fire pit to different locations around your home.

If using natural gas, you would need to hook up the gas lines to the natural gas supply of your home in a more permanent structure. Natural gas is, however, cheaper, and the setup lasts for longer than propane.

Location of the Fire pit

For safety concerns, we recommend you locate your fire pit away from flammable surfaces and items. While gas fires do not emit sparks or other flying materials, they do contain a lot of heat that can melt nearby delicate surfaces. Always refer to the guidelines of your location regarding open fires on private property.

Summing up

Need solutions to water, plumbing and HVAC issues? Our expertise in the industry, as well as our ability to provide leading products in the 21st century, makes us stand out from the competition. Our smart solutions and expert knowledge on plumbing systems means that we’re always prepared to help. Contact Forrest Anderson today.

[cta_post]

How to add a BBQ Sink

Adding water access to your BBQ rig is a great way to make the grilling process run smoothly. No more constant trips indoors and back carrying containers of water. But while this sounds like a great idea, just how can you get it done? This article will share tips on how you can efficiently install a BBQ sink to your rig and keep getting your grill on!

Choose the right BBQ Sink

The first step is to choose the right type of sink that will suit your BBQ setup. You have the freedom to choose from many different shapes and sizes. As for the material, stainless steel is the obvious choice. For an outdoor setup, it is durable, hygienic and convenient for use. The material is important because you definitely want to avoid rust building up on the surface of the BBQ sink.

Identify where you want the Sink to go

Each grill setup is unique. It is, therefore, important for you to identify where you would like your sink to be located. That way you can begin to plan out how you will add water access. Typically, adding the sink to the front or the sides of the BBQ rig can make it easily accessible and less intrusive on the rig itself.

Identify a Source of Water

There are many ways to which you can add water to the BBQ sink. One way to do it is to run a supply pipe designated for outdoor use from the indoor pipes. You can install the supply pipe by joining it to the indoor supply, installing several shut-off valves along the length, and sloping them slightly to enable the pipe to drain.

Another way to do it is to connect a garden hose to the inlet of the BBQ sink and regulate water coming in from the source of the hose. This makes it quick and convenient to gain water access.  A third way to do it is to install a tank underneath the BBQ sink that can act as a reservoir water source if you do not have access to a direct source. The size of the tank will depend on your needs and the size of your BBQ rig. Once you have the tank installed, all you need is to add an inlet pipe going towards the sink and a drainage pipe (discussed below).

Install a Drainage Pipe

Of course, you can’t have a BBQ sink without figuring out where the water will drain. The first step is to hook up a pipe that connects to the bottom of the sink where the water is draining. But where will it drain to? There are several options to consider.

You can install a wastewater tank, which you can drain anytime it fills up. Another option is to run the drainage pipe back into the indoor plumbing system (this step is more involving but it allows you to use your sink much like you would an indoor sink). You could also set up a dry well where the waste will run into. If you choose this option, be selective of what you will drain down the sink because there is the risk of the dry well having an unattractive smell as it continues to fill up.

Summing up

Need solutions to water, plumbing, and HVAC issues? Our expertise in the industry, as well as our ability to provide leading products in the 21st century, makes us stand out from the competition. Our smart solutions and expert knowledge on water systems means that we’re always prepared to help. Contact Forrest Anderson today.

[cta_post]

How to Change an Air Filter

When you own a home, there’s always simple maintenance that needs to be performed. You have to change light bulbs, maintain the yard, clean the pool…and change an air filter from time to time. Most of these can happen pretty quickly on your own if you have a little time and knowledge. And when it comes to air filters, you probably won’t even need any special tools. Here’s the down and dirty on the DIY of changing your home air filter.

Locate Your Air Filter

The first thing to do is identify where your air filter is. It can be on either floor of a multi-story home (or even on both). It could be in the ceiling, behind a door, or behind an intake vent on the wall. What it shouldn’t be is hidden since your air filter is where air is brought into the HVAC system.

Determine the Size Filter You Have

Once you know where the air filter is, you’ll want to open the compartment and find the size of the existing air filter. Some HVAC systems have more than one, especially if the intake is located behind something that resembles a closet door. And they could be different sizes, so note that.

You won’t need to measure the air filter. Instead, look along the side for the measurements. There will be three: the length, width, and depth. Write down these numbers, as you’ll need them when you go to the store so you can buy replacements.

Choose Your New Filter

You have a few options when it comes to purchasing your new air filter. While you have to get the size you need, it’s the quality that will differ. There are very inexpensive air filters that are just a few dollars each. Then there are the expensive ones that filter out pet dander and allergens. Besides price, the other difference is how often you’ll need to change an air filter. The cheaper ones need to be switched monthly; higher-quality options get changed quarterly.

Remove the Old Filter

Okay, so you know where the filter is located, and you’ve already looked at it to get the size, so this part should be easy. Just take out the filter. Be sure to carry it directly outside to the garbage bin. Do not pass go, and do not collect $200. If you put the dirty filter down, all of the dust captured on it is likely to transfer to your table or floor. And that makes a big mess. Believe us on this one.

Put in the New Filter

If you want to add some good smells to your home, consider adding some essential oils to the filter before installation. Adding aromatherapy to an air filter will freshen up the whole house.

It’s important to notice the direction of the arrows on the filter when you change an air filter and install it correctly. The arrows will say “airflow” and the direction in which airflow should go. Remember that the filter goes at the intake of air, so air flows into it. Because it’s an air conditioner, some people mistakenly think the flow of air is out, but that’s not the case at the filter.

Secure the filter, and you’re good to go! Now just add a reminder to your calendar to change the filter when recommended based on the type you purchased.

Change an Air Filter, Schedule Your Annual Inspection

During those summer months when you’re constantly running your A/C it’s a good idea to change an air filter once a month. The cheap filters can only handle so much and the high filters are gathering so much dander and dust they fill up quick and start to restrict your homes air flow. And if your home has carpet floors rather than tile or wood, then you will need to change your air filter more often too.

If you can’t remember the last time you purchased an air filter, it’s probably time to call a professional for an HVAC inspection. The team at Forrest Anderson will come out to your home and conduct a thorough inspection to see how your system is performing. Don’t get stuck thinking, “Maybe our AC system will last one more season.” Instead, rest easy knowing everything is in tip-top condition. Call now to schedule!

[cta_post]

BBQ Gas Line Installation Guide

The telltale signs are there.  The restless feeling that won’t be relieved until you remember where your hammock got packed last fall. The siren call of summer is here and it’s past time to fire up the old barbecue. And it’s never too late to “up” your grilling game with a BBQ gas line installation. You want to always be ready to fire up the grill at a moment’s notice.

An Easy Guide to BBQ Gas Line Installation

To begin, while there is a lot to be said for traditional charcoal briquettes, but quick and clean are not to descriptive terms that jump immediately to mind.  A different set of problems exists for propane tanks as well.  Clunky, bulky, and always empty on the day of the big game, propane gas owners have their own reasons for improving this year’s grilling season. Learn everything you need to know to when running a gas line to a BBQ.

Before you start installing your BBQ line, it’s necessary to review your natural gas capacity, local permitting requirements, and municipal codes.  In addition to risking a fine for unpermitted work, a major part of the permitting process involves certified inspections designed to ensure proper BBQ gas line installation.

You’re are dealing with something with the potential to explode.  Make sure you cross all your “T’s” and dot your “I’s” when it comes to adhering to local building codes.  Homes not up to code can prove hazardous to you, your family, your home, and your neighbor’s property.

The restrictions often include requirements regarding how far from utilities and structural units you must run your gas lines. Or how deep to bury them.  You may learn all you really need to do is install a quick shut-off valve that will only be used when you grill.  Lastly, a give your HOA a quick call. The HOA can give you recommendations on the types of grills approved for your home community.

Call Before You Dig

Also, call your local utility company before you start to dig and install the BBQ gas line. This is a best practice because they may need to come out and turn your gas on and off during the installation.  Connecting gas lines require specialized tools, valves, pipes, and supplies to successfully install into your BBQ.  Seeking out expert help is critical to safely outfit your patio grill with a continuous flow of natural gas. Consulting an expert also ensures you and your family will be able to safely use the grill all season long.

Call Our Expert Team for a Great BBQ Gas Line Installation

If you are looking to upscale your barbecue experience this summer with a permanent supply of natural gas, you need to call our professional staff to assess your needs and explore the best options for tricking out your backyard barbecuing experience in ways you never thought imaginable.  There is no reason to put off those summertime dreams when we can devise a safe, efficient, and cost-effective plan. Guaranteeing to turbo charge your backyard summertime fun.  If you have questions about the best way to install your BBQ gas connections, contact us today to get the scoop on how you will never need to run out for propane or charcoal briquettes ever again.